A loading gauge defines the maximum height and width for wagons.  The gauge assures  that the  wagons  with loaded  vehicles can transit safely through bridges, tunnels and other rail  infrastructures.
While the majority of railways in Europe use 1,435 mm standard gauge or 4 ft 8 1⁄2 inch, in other countries  such as Spain or countries which territories used to be a part of  the Russian Empire a broader  gauge is used. For instance in Spain it is 1,668 mm   known as Iberian gauge, while in Russia, Ukraine, Belarus, Finland, the Baltic countries the gauge width is 1,524 mm known as Russian gauge. The development of an integrated European HSR network is overcoming some of these differences. All HSR outside Russia, including those built in Spain and Portugal, use 1,435 mm standard gauge rail tracks. For conventional lines the replacement is considered  too expensive and local solutions are used  such as rolling stock able to adapt to the  two gauges.
The alignment of the  Core Network to Gauge C (4m high) helps  modal shift for  higher containers competing  with road haulage.  Higher gauges facilitate double decker passenger carriages. For conventional lines, the replacement is considered requiring too high investments.
The train length and axle loads are relevant topics for freight. In order to  increase capacity at the European level,  the trains are generally 750 m long, but efforts need to continue promoting the operation of longer trains, doubling their length up to 1,500 m. Such move  helps the productivity increase of the existing rail lines improving the  system performances by transporting more with the same resources.
The standardisation initiative of the axle load up to 22.5 tonnes is essential for loading trains to their maximum capacity introducing them into the network without facing problems from source to destination. These measures must go together with investments aimed at removing the network bottlenecks, increasing network capacity and interoperability. In conjunction with an increased tonnage, 20-25 % fewer train paths  are required on the international corridors. While improvements of the permissible trains’ length and weight might be enforced, the doubling of the train length to 1,500 m requires actions such as the extension of overtaking tracks, the  enhancement of the signalling systems  and the nodes having  coherent facilities for these trains. Only parts of these actions are in scope of  the current TEN-T program.